Framework Laptop 16 Display Removal

Written By: Alex Diaz-Kokaisl
  • Comments: 0
Framework Laptop 16 Display Removal

Difficulty

Easy

Steps

6

Time Required

10 minutes

Introduction

Use this guide to replace the display in your Framework 16" laptop.

  1. MrtTG1baFao3RwAy
    MrtTG1baFao3RwAy
    OZqOaHhJNdGem5aA
    CaxZ6WNtKfppNcVq

    • While supporting the display with one hand, use your Framework Screwdriver to remove the four 2.4 mm‑long T5 Torx screws securing the display.

  2. KfZp2YvwUQGACjE1
    KfZp2YvwUQGACjE1
    J1nSHSHgJnIHEjWu
    CW12NgPHwfQ1Dksd

    • Grab the display and pull it straight off the Top Cover to free it from its alignment pegs.

    • Don't pull the display too far from the Top Cover, as it's still attached by a cable.

    • Flip the front of the display down and rest it on the keyboard.

  3. DtkEDSpkoFxZXek4
    DtkEDSpkoFxZXek4
    GLEQcRdXJgkM3v3t

    • Use your fingers to flip up the plastic tab and access the connector underneath.

  4. blSwvyuY2pN1YsR3
    blSwvyuY2pN1YsR3
    WRSE5EFTLtxhoqTZ

    • Use the flat end of your Framework Screwdriver to lift up the metal locking tab over the eDP cable connector.

  5. XqJHlYZfRROtN2lb
    XqJHlYZfRROtN2lb
    6CmkNrcQHOSZWYQe

    • Grip the eDP cable where it meets the connector head.

    • Slide the connector straight out of its socket to disconnect it.

  6. 2KDTPf6WpVqZ5DlW
    2KDTPf6WpVqZ5DlW
    XkVXHGiWwLn1t1jR

    • Remove the display.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers Community for help.

Author

Alex Diaz-Kokaisl

Member since: 16/01/22

215075 Reputation

0 comments