Introduction
In this guide you will be removing the back panel from the rest of the phone.
-
-
Place the phone face down on the table.
-
Pull down the tab below the battery with your fingernail or an opening tool.
-
Lift the battery out.
-
-
-
Locate the five rubber covers on the back panel of the phone.
-
Use a metal probe to remove each rubber cover and expose the screws underneath.
-
-
-
Locate the six 2.5-millimeter Phillips #00 screws on the back panel.
-
Remove all six screws with a Phillips #00 screwdriver.
-
-
-
Locate the seam around the edge of the phone.
-
Insert a plastic opening tool into the seam and gently pry to release the tabs.
-
Work around the phone until all tabs are released.
-
Remove the back panel.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
